Payment & Shipping Terms:
|Name:||Rigid Hulled Inflatable Boat||Tube Material:||1.2mm PVC|
|Tube Diameter:||54cm||Air Chamber:||5|
|Max Power:||250hpHP||Warranty:||5 Years For Hull, 3 Year For Tubes|
Compact Structure Rigid Hulled Inflatable Boat With Honda Outboard Engine
Rigid Hulled Inflatable Boat General View
This ST-RIB750 includes center console, standing seat, built-in fuel tank, and an 250hp Honda outboard engine.
Our customer use it for fishing, with this 250hp engine, it can reach above 35 knots in the sea.
Details of Rigid Hulled Inflatable Boat
The hull is made of glass-reinforced plastic (GRP) composite for the shaped and smooth surface. The hull of a RIB is shaped to increase the performance of the boat in the water by optimising its hydroplaning characteristics. "Deep-V" hulls cut through waves easily but require greater engine power to start planing than "shallow-V" hulls, which plane at lower speed but with a more uncomfortable ride. As with the design of most boat hulls they represent a compromise of different design characteristics. Modern "all round" RIB hulls combine a deep v hull at the bow which flattens out to present a broad planing pad. This is a flat area on the rear of the hull designed to allow the boat to have a stable surface to plane on.
The tubes are usually constructed in separate sections to reduce the effect of a puncture, each with a valve to add or remove air. Larger boats (7m+) have 6 or more chambers with a valve for each chamber. The more chambers a boat has the more redundancy the boat is considered to have. This is because if only one chamber is damaged then the impact the damage has on the boat is much less. Dark tubes often have pressure relief valves as the air inside them expands when exposed to sunlight. This prevents the tubes bursting from overpressure. Common materials for the tubes are Hypalon and PVC.
Tubes made of Hypalon are easy to manufacture and can be repaired with simple puncture repair kits. Hypalon is not airtight and so must be combined with Neoprene when used to build tubes. Tubes made with Hypalon and Neoprene layers can last at least 8-10 years. Hypalon is probably the most popular material used for the construction of RIBs manufactured nowadays.
·PVC (Polyvinyl chloride)
As a material for building tubes, polyvinyl chloride (PVC) has the disadvantage of lacking flexibility. To make it supple, an additive is used with the polymer. This additive vaporizes as the material ages, making the PVC brittle and allowing it to crack. A PVC tube is the cheapest option and can last approximately 5-8 years.
Larger RIBs can have hard-tops or wheelhouses made of GRP or aluminium. Wheelhouses offer protection from the elements to both the crew and passengers – and can also protect equipment such as suspension seats and navigation equipment. We can also offer the cabin which form fabric and perspex wheelhouses but can be easily removed in good weather. Increasingly, RIBs are becoming available with small cabins (usually with accommodation for two people), widening the application of RIBs as cruising craft.
Rigid Hulled Inflatable Boat Specification
Steering console & seat
Anti-skid deck surface
Bow&rear stowage lockers
Built-in 200L aluminum fuel tank with level gauge
FRP anchor rack
Bow towing ring
Automatic bilge pump
Stainless steel arch with navigation lights
Water ski holder
Stainless steel foldable ladder
Six function switches
External devit lifting points
Hydraulic steering system
mechanical steering system
80AH maintenance-free battery
Stainless steel foldable canopy
Specifications for different kinds of rigid hulled inflatable boat
|Model||Overall Length(cm)||Overall Width(cm)||Tube Diameter(cm)||Air Chamber||Max Person||Max Power(hp)|
After-sale service of Seastone
1. 3 years guarantee for PVC tubes, 5years for hypalon tubes;
2. 5 years guarantee for fiberglass hulls;
3. For serious product problem, the same model will be replaced for you freely or we bear the charges repaired at the local repair shop.
4. For small tube breakage, it can be fixed with PVC/hypalon &glue in the repair kit;
Rigid Hulled Inflatable Boat Details
Contact Person: Grace Li